Our products

The 15-ton drawbar tool transporter handles heavy tool shapes even on uneven ground.

Optimized storage space efficiency thanks to the installation of pull-out guides for the transported goods.

This pallet truck is suitable for transporting ATMs of various widths.

The push-on arms are picked up via fork retraction shoes. The integrated prism holders ensure safe transportation of steel containers.

The crane-operated axle transport beam is used in the workshop as an aid for checking the axles.

To avoid having to buy new forks and arm supports, the mounting jaws were replaced with wider and new FEM jaws.

Battery lifting beam with particularly low overall height and mechanical width adjustment for a Jungheinrich towing vehicle. It is picked up by the existing overhead crane.

Battery changing hanger for changing the battery of a Linde E50 forklift truck. The battery is picked up by a crane.

This stationary device loosens clumped sodium filled into big bags.

With the SCHURZ big bag clamp including cutting device and optimized wheel bearings for forklifts, up to 100 big bags (400-1500 kg) can be placed safely and efficiently into a bunker every day by just one operator.

This special design automatically cuts open the underside of fully loaded big bags using a front loader.

This connection adapter makes it possible to operate the SCHURZ wheelset clamp with a Fuchs material handler type MHL 331.

The battery-side forced guidance, including the substructure, has been optimized so that the forklift battery can be changed quickly.

The mechanical emptying device is suitable for picking up standard scrap containers with a maximum weight of 18 tons.

Crane forks with electric center of gravity shift for the safe and efficient transport of heavy casting tools up to 3.5t .

These crane grabs or clamp grabs are suitable for picking up PVC sockets of different dimensions. They are picked up via the overhead crane.

The narrow design of the crane jib ensures the best possible visibility. In addition, the two rotating swivel hooks can be optimally positioned to pick up the load.

The fireproof, two-part crane lifting beam with special adapters for round material is required for transporting red-hot parts.

Crane lifting beam with 500 kg load capacity, less than 30 kg dead weight and tool-free, attachable suspension hooks

The crane spreader beam has various suspension points for flexible load suspension.

This crane spreader beam was designed for handling steel shafts. It has load securing on both sides with spring-loaded securing brackets.

The lifting beam was designed and manufactured for picking up big bags using an indoor crane.

The SCHURZ crane spreader beam is radio remote-controlled and electro-hydraulic and is used as a lifting device for steel drums.

A forklift truck was retrofitted with a customized comfort cab to ensure protection and comfort in all weathers.

The transfer car is designed for transporting metal drums weighing up to 7.5 tons. In conjunction with the two adapters supplied, it is designed for use with 2 different forklifts.

These push-on arms for drums are also suitable for drums with 3 beads. The push-on arms are locked automatically and the clamp shells are interchangeable.

The drum transport trolley is suitable for transporting drums of different sizes that weigh up to 6 tons and have a diameter of up to 3.7 meters. Manipulation is carried out by a forklift truck via the fork entry shoes.

The SCHURZ compact mobile crane has a lifting function, a 2-way telescopic function, a side shift function and a slewing function.

Repair of a 10-year-old tipping device

The hydraulic emptying device for excavator operation is suitable for picking up and handling 5-ton scrap metal containers. Both the grab and the emptying device are equipped with a quick-change system to enable the attachments to be changed quickly.

Foam blocks of different sizes and weights of up to 290 kg are clamped without damage using the SCHURZ foam gripper and manipulated using a column-mounted slewing crane.

The SCHURZ foam gripper for crane operation is used to manipulate foam blocks with a maximum weight of 1,000 kg.

A special fork attachment for a Still pallet truck for manipulating roller trolleys.

Repair of a 360° rotating clamp fork

The self-locking fork extensions with customized storage rack ensure safe and efficient transport.

Battery changing hanger with a load capacity of 3,000 kg for crane operation.

The gearbox manipulator is used to install and remove heavy gearboxes in construction machinery.

General overhaul and adaptation of a clear-view tine adjustment system

Testing and preparation of a special crossbeam

Different coatings were applied to gripper shell blanks for crane hoists to test which is best suited for holding paper rolls.

Conversion and adaptation of a Linde low lift truck type T 30 to a heavy duty lift truck for 5 tons load weight.

Cost savings by converting heavy-duty trailers from 12 meters to 6.5 meters in length.

A transport platform for 60 tons of heavy-duty rollers, designed as a trailer for tractor operation.

Heavy-duty transport trolley for transporting drums with a diameter of up to 5 meters and a maximum weight of 8 tons.

The height-adjustable sorting table was developed for a screw manufacturer.

The hydraulically height-adjustable fork is a special design for the safe transportation of frame components.

The automated pipe crane is used to manipulate plastic pipes with a maximum length of 6 meters and a maximum weight of 5 tons.

The SCHURZ lifting and turning device was specially designed and manufactured for our customer to lift and set up ovens with a maximum weight of 2,000 kg.

The lift mast with forks is picked up by the overhead crane and is used to store and retrieve bar stock from cantilever racks.

The lifting beam is used in the automotive workshop for fixing diesel engines.

Lifting beam with crane lifting platform for transporting paper rolls. The platforms are equipped with run-in shoes to move them to the desired position with the forklift.

SCHURZ lifting beams for handling bulky structural steel grids. One lifting beam is picked up by the forklift, the others were designed as lifting beams for the overhead crane.

This carrying mandrel for Linde forklift trucks type L10 and L14 enables the fast transportation of rolls up to 3 m in length, 350 mm in diameter and 200 kg in weight.

The SCHURZ wheel clamp enables the lifting of railroad wheels with an overhead crane.

Attachment of additional, hydraulically lowerable, rotating Vulkollan support wheels

The SCHURZ load handling device enables damage-free manipulation and 90° tilting of gear units during production.

Specially manufactured load hooks for the hot-air oven for use with the overhead crane.

The electrical load safety device enables the safe transportation of forming tools.

The SCHURZ load lifting beam is used to lift rolls and shafts from film cutting machines. It is picked up via the crane hook.

Long goods traverse with six extension forks, camera system and level compensation

Long goods spreader beam with storage rack for transporting pipe systems

The mechanical version of the drum emptying device can be picked up either with the existing forklift forks or by crane.

With these mechanical log tongs, logs with a diameter of up to 450 mm can be mechanically gripped and manipulated.

Mechanical roller lifting vehicle for lifting steel shafts from a production machine.

The mechanical SCHURZ underride bucket enables safe, efficient bulk material transport up to 1,200 kg/m³ and simple, tool-free mounting thanks to locking flanges.

Motorcycle manipulator - lift for VW bus. Suitable for all motorcycles, also available for 2 machines side by side.

Dismountable lifting devices for various wheel loader types for attachment and support on the cab in order to be able to attach the chain hoist.

A custom-built high-lift truck for transporting metal racks on uneven floors, some of which are made of metal plates.

Pallet dispenser with magazine function for storing 10 pallets and a handling capacity of 100 pallets per hour.

Conversion of an electric pallet truck with bale clamp

Conversion of a Linde T20 AP to manipulate special tugger train trailers.

250 kg boxes in the basic shape of a Euro pallet must be emptied sideways into a funnel using the box emptying device.

With the swivel push fork, loads can be picked up from the side of the floor and stored and retrieved on the right or left side of the rack.

Particle filter mounted on a work platform type SJ 6826RT

The rotating picking table is designed as a stationary unit and is bolted to the floor. It is operated using a foot pedal, which allows it to be rotated through 180°.

SCHURZ column-mounted slewing jib crane with a load capacity of 275 kg.

The solution enables the safe and space-saving storage and retrieval of different load carriers in narrow aisles with forced guidance.

The solution enables fast and safe tool changes by just one employee, reduces downtimes and increases production efficiency.

Quick connecting rod for wagon underframes

Repair of a quick-change fork carriage

Quick-connect rod with quick-release fastener to connect two chassis units together. Up to 5 units can be connected together.

This rail-mounted, robust platform including battery changing hanger was designed and built for use in a foundry.

Reconditioning of a fork carriage/fork tine unit for a Jungheinrich pallet truck

Repair of a concrete ring clamp after 14 years of intensive use

Repair of a fork carriage due to a forklift accident

To avoid having to buy new forks, the upper mounting jaws were replaced.

Roller blocks for oil drill rods

The tarpaulin rolls are picked up manually using the lever on the roll lifters and manipulated to the desired position using the overhead crane.

The reel transport device clamps, lifts, turns and transports reels with variable diameters and lengths.

These shaft forks for a Hyster E 2.00 XM electric forklift truck were fitted complete with all weld-on parts and support rollers from the old forks.

Slip clutch for forklift trucks with built-in release device

The SCHURZ slip coupling is attached via the original hitch of the Fendt tractor and is designed for pulling transformers with a maximum weight of 500 tons.

With the special battery change charging fork, it is possible to change the traction batteries of a Linde E80 forklift truck via the mounting ring for the crane hook.

The special container securing system is fixed to the FEM carrier plate of the reach truck. It is mounted using round bars that are welded onto the containers.

The special version of the electric pallet truck is used for loading production machines with rollers.

Fork extensions 2m in closed, individual design with quick-release fastener

The special forks are designed to safely load tool trolleys and molds into an autoclave. However, conventional Euro pallets can also be manipulated.

This SCHURZ hand pallet truck has been specially designed and manufactured for transporting cable drums.

A special modification to a standard device enables the uncomplicated mounting and storage of 750 kilogram tool molds.

Particularly robust, customized lift mast for Linde forklifts.

This special loading fork has a center of gravity compensation. It is picked up by the indoor crane.

The stationary assembly device makes it easier for employees to attach and install various systems to window frames. The assembly device can be maneuvered to other locations using fork entry shoes.

A customized overhead guard solution for an existing Crown tiller.

The SCHURZ column-mounted slewing jib crane with a lifting capacity of 6 tons lowers the corresponding loads into the dip tank and is also used for further manipulation of the loads.

A special trolley for transporting bales weighing up to 380 kg. Manipulation is only carried out by the force of a single person.

With the manipulator, foam blocks with a maximum weight of up to 400 kg are clamped, lifted, moved and lowered onto the conveyor line rotated by 90° within 30 seconds.

The battery changing system is suitable for holding 2 batteries next to each other and has a mechanical barrier to prevent them from rolling back.

The stationary lift mast makes it possible to raise and lower a roller conveyor.

The stationary emptying device is used to feed a feed hopper by emptying transport boxes, crates, containers, steel drums and big bags.

For simple and safe vertical deburring of copper pipes with different diameters and wall thicknesses:

The SCHURZ support mandrel is simply and securely attached to the carrier plate of the forklift and firmly bolted on with robust screw-on jaws.

Repair for a tine adjustment in special design.

Repair of the telescopic push rod with lifting gear

Repair of a Kaup fork positioner

This stationary tipping system enables efficient cleaning of the seed hoppers.

The manipulator for tool maintenance ensures simple and safe turning of various tools.

The 360° rotating tool manipulator is used to safely and easily pick up forging tools.

This tool manipulator enables forging dies with a maximum weight of 2,000 kg to be picked up safely and easily. The mandrels have been specially adapted to the molds.

3-point linkage for an electric centrifugal broadcaster via the rear of a Steyr tractor

The destacker for pulp bale units is used for the automatic destacking of 3 or 4 half-units of pulp bales.

During filling, the big bag is placed on the platform of the SCHURZ vibrating table and vibrated with direct contact, whereby the granulate is optimally compacted.

This wagon axle transport spreader beam was designed for crane operation and has a load capacity of up to 2 tons.

The shunting device can be used to safely push and pull wagons with a wheel loader.

Wall clamp (gripper) with automatic locking and unlocking mechanism.

This wheel manipulator with external clamping of large wheels can clamp, swivel and tilt wheels with a maximum weight of 1,600 kilograms.

The wheel manipulator has 5 hydraulic functions and is used to pick up wheels with a maximum weight of 1,400 kilograms.

The Schurz wheelset clamp enables the wagon axles to be attached to the wheelset clamp. This allows the wagon axles to be handled gently.

This workshop crane is used to lift machine parts into and out of stationary baking systems. In order to meet the requirements of the application, the company ING. M. SCHURZ carried out a conversion, whereby the basic height and the load arm were adapted according to customer requirements.

Particle filter mounted on a single-drum compactor with an engine output of 108 kW

This special SCHURZ slip coupling for pulling wagons is suitable for a Komatsu WA 250 wheel loader. It is attached via the original hitch of the wheel loader.

Fleece rolls with an excess length of up to 5 meters can be easily handled with this special drawbar pallet truck.

Wagon buffers weighing up to 400 kg can be replaced safely, effortlessly and without damage using the SCHURZ buffer assembly device.

Particle filter mounted on a Kalmar diesel forklift truck type 6 t + 7 t with an engine output of 86 kW

This SCHURZ slip coupling is suitable for the suspension device of a Kalmar DCG 160-12 forklift truck.

This assembly aid is equipped with a circuit board holder that is specially adapted to the entry situation of the enclosures, some of which are floor-to-ceiling.

Particle filter installed in a dumper with an engine output of 22.6 kW

Rockinger trailer coupling for forklift operation for truck trailer manipulation

Particle filter for a Weidemann Type 1140 with an engine output of 18 kW

This SCHURZ slip coupling is suitable for a Daewoo forklift truck and is attached to the counterweight of the industrial truck using bolted connections.

The low lift pallet truck can be used for rail operation as well as for standard operation. It is used to manipulate walls for prefabricated houses.

A converted Linde T 20 pallet truck with the SCHURZ pick-up adapter for transporting glass panes.

Particle filter mounted on a 3 t Hyundai diesel forklift truck with an engine output of 48 kW

SCHURZ slip coupling for a Kalmar forklift type DCE 120 - 12 for tool-free attachment via the rear hitch of the forklift.

SCHURZ swivel push fork for lateral storage of Euronorm pallets using a front loader.

This interchangeable transport hook can be used to lift and pull the roll-off containers from the ground.

Particle filter mounted on a Still diesel forklift with an engine output of 52 kW

Particle filter mounted on a Liebherr wheel loader type 508 with an engine output of 48 kW

The diameter of an existing support mandrel had to be reduced and fitted back into the support plate.

Space-saving storage of metal boxes with glass bottles using the SCHURZ swivel push fork with suitable adaptation of the base vehicle.

Fork root designed without inner radius, for safe transportation of containers

Particle filter mounted on a Merlo telescopic handler with an engine output of 105 kW

Here, a Linde E25/600HL BR387 forklift truck was converted and adapted for the attachment of a swivel push fork. The swivel push fork is designed for 1,200 x 1,200 mm pallets.

Complete vehicle conversion with special lift mast. The front loader was also equipped with a swivel push fork for lateral storage.

A SCHURZ double pallet fork with integrated sideshift was equipped with a hydraulic load safety device.

Particle filter for a telescopic handler with an engine output of 74.9 kW

This project comprises the conversion of a front forklift truck to a narrow-aisle forklift truck with a pivoting push fork or sideshift unit.

Particle filter installed in a Volvo L60F wheel loader with an engine output of 115 kW

Due to the incorrect purchase of a new forklift truck, the carrying mandrel had to be modified and optimized.

Conversion of the mount for a telescopic crane arm

A Linde T 20 low-platform truck serves as the basic vehicle, which was specially adapted for the individually manufactured hydraulic tipping device.

Particle filter for diesel forklifts with an engine output of 145 kW

Changing the fork opening range of the tine adjustment

The SCHURZ electric pedestrian pallet truck is used to transport horizontal paper rolls with a maximum weight of 3000 kg.

Particulate filter mounted on a Volvo TAD 734 GE diesel genset with an engine output of 220 kW

Electro-hydraulic heavy-duty pallet truck with camera system for changing tires on various wheel loaders.

The internally changed situation required a modification of the appliance. It no longer empties pallet cages, but cardboard pallets.

Particle filter for a Liebherr A 900ZW excavator

Adaptation of trays for special barrels

Heavy-duty pallet truck for transformer coils

Particle filter without catalytic converter for a sweeper with an engine power of 10.4 kW

Particle filter for Euromach Type 6500 with an engine output of 70 kW

This pedestrian stacker in a special design has, among other things, a forced guidance system to prevent damage to the transfer stations.

Conversion from standard forks to hydraulically height-adjustable special forks

The forward tilt of the mast has been greatly increased so that metal parts can slide off the fork without any effort.

Particle filter mounted on a dumper with an engine output of 209 kW

The cab frame conversion makes it possible to reach the pallets at the rear of the rack, as the entire forklift truck can be driven into the rack.

Particle filter mounted on a MAN TGA 26.310 truck with an engine output of 228 kW

Optimized oven loading was made possible by converting the high-lift trolley.

All-steel cabin adaptation of a Linde forklift truck type E16C, specially adapted for drive-in racks

Conversion of a Linde L 16i electric high lift truck with a load capacity of 2,000 kg / LSP 600 mm to a load capacity of the initial lift of 3,000 kg / LSP 600 mm.

Particle filter mounted on three MAN trucks type 26.285 with an engine output of 209 kW

A cab damaged in an accident was converted for reuse in compliance with all regulations and standards.

Particle filter for a Mercedes 4140B with an engine output of 290 kW

A Still stacker TYPE EGV 160 was converted into a SCHURZ pedestrian stacker with a tilting device for shafts and rollers.

Particle filter mounted on a diesel sweeper with an engine output of 26.5 kW

Complete cab conversion of a Linde P60 tractor

Special pallet truck with weighing device and mandrel for handling copper rolls weighing 700 kilograms.

A Linde L14 L SP high lift truck was converted into a cantilever ride-on high lift truck.

Particle filter mounted on a Doosan diesel forklift truck.

Manipulator with mandrels for tools

Particle filter mounted on a 3.3 t Daewoo diesel forklift truck with an engine output of 43 kW

Shunting of wagons with wheel loader

This converted Linde L 16 is used for handling pallets and boxes with special dimensions.

Adapter for pallet trucks for manipulating roller trolleys

Particle filter with high-temperature-resistant monolith and rapid clean combustion on the vehicle

SCHURZ lifting beams for handling bulky structural steel grids.

The basic load capacity of a Toyota BT low lift pallet truck type LRE 200 was increased to 3,000 kg at LSP 600 mm.

Particle filter mounted on a JCB telehandler with an engine output of 74.2kW

SCHURZ transport platforms with drive-in shoes

Particle filter mounted on a Linde S 60 diesel forklift truck with an engine output of 63 kW

The veneer roll manipulator has a hydraulic lifting and tilting function for gentle manipulation of rolls.

The hydraulic roll manipulator manipulates paper rolls with a weight of 250 kilograms. This special design ensures that pressure marks on the paper rolls are avoided.

Particle filter for rail vehicle motorized scaffolding wagons with an engine output of 34 kW

The SCHURZ special fork positioner has a valve block unit specially produced for this purpose, which enables light and independent clamping and spreading tasks to be carried out.

Particle filter mounted on a JCB wheel loader type 426 HD with an engine output of 123 kW

This space-saving coil manipulator included the conversion of a standard Linde L10B and the attachment of a SCHURZ carrying mandrel.

Barrel transportation and emptying are possible with this device. The special tilting kinematics enable thin clamping arms to store the drums close together.

The SCHURZ combi pedestrian stacker is equipped with a carrying mandrel specially designed for transporting concrete channels. In addition, a pallet can be manipulated thanks to the double lift.

The mechanical version of the drum emptying device can be picked up using existing forklift forks or a crane.

Particle filter mounted on an 18 t diesel forklift truck with an engine output of 142 kW

Hydraulic drum tilting clamp for mounting over the forks of a forklift truck for drums weighing up to 400 kg.

Particle filter for a Kalmar DCD 150 - 12 forklift truck with an engine output of 129 kW

This pedestrian pallet truck was adapted accordingly and equipped with a tilting device and a hydraulic load holder.

Euro pallets loaded with up to 56 plastic crates have to be transported. The stacks of crates must be picked up gently but safely.

The mast of a Toyota BT 4-way reach truck type FRE 270 had to be shortened due to the hall passage being too low.

Foam roller clamp with fold-out load holder

The basic vehicle only had a rigid lift mast. At the customer's request, this was equipped with a mast inclination to the rear.

Conversion of a pedestrian stacker to a foam clamp with side shift and quick-change device.

Stationary lifting mast for manipulating refractory material.

Pedestrian stacker with paper roll clamp

Special lift mast for extreme loads

Lift mast extension for Dimos 4-way forklifts

The SCHURZ drawbar stacker with paper roll clamp ensures safe and damage-free transportation of crepe rolls.

The duplex clear-view lift mast with two hydraulic functions was built to replace the damaged original lift mast.

A Toyota pedestrian stacker was specially adapted for use as an emptying device.

With this device, metal mesh boxes or pallets with stacking frames with a maximum weight of up to 600 kg can be picked up and hydraulically rotated forwards by 180°.

Preparation of a Still Triplex lift mast and a fork positioner.

Retrofitting an all-steel cab incl. cab heating for a Linde E16 forklift truck

This hand-guided SCHURZ load manipulator is used to place vendor parts for automotive engine production in tempering furnaces.

An additional, heavy-duty protective roof was built over the standard overhead guard.

If narrow routes in the warehouse restrict the size of the vehicle, a special pedestrian pallet truck can help.

A complete system designed for dignified and sensitive handling of the coffins with the deceased.

Raising the overhead guard of a Linde TGL16 pedestrian stacker provides more headroom in the standing area and better upward visibility.

A Linde L12 pedestrian pallet truck serves as the carrier vehicle. This was equipped with a hydraulic lift, clamp and side shift function, especially for the manipulation of coffins.

Overhead guard for pedestrian-controlled forklift trucks

Overhead guard for a Linde TGL1 pedestrian-controlled forklift truck

Drum turning device plus forklift adaptation with electric & hydraulic cooling

Underride trough to accommodate roll containers

Machine feet weighing 70 kilograms can be set down at predefined points by just one person using the SCHURZ machine foot manipulator.

Fork tipping device for transporting round timber

Bag manipulator with 3 hydraulic functions

Rotator with quick-change device for operation on a telehandler

8-way pallet fork for holding 12 half pallets

Hydraulic telescopic push rod for gentle positioning of collis in the container.

Emptying adapter for pallet cages of different heights

Platform for transporting a forklift truck

Transportation of different vehicles

Slip-on support arms for transporting steel coils

Transport device for sheet metal coils

Roller conveyor with prism-shaped support arms

Special fork attachments for mounting towing axles

Telescopic push rod and lifting/pushing device for loading containers with goods

Lifting device for cable drums

Coated and 360° rotatable transport platform

Support frame for pallet truck

Securing the mesh box with special slip-on shoes

Pedestrian stacker conversion from forks to load extension arm

Coated transport platform for coils and steel rollers

Picking up pressing tool plates with the pedestrian stacker

Loading and unloading manipulator with tilting support for foam rolls

Roller carriage manipulator

Transport and cutting device for big bags

Special device for unloading big bags

Transport device for special big bags

Coated clip-on arms for large-area clamping

Load securing with three-way adjustable side panels for stacking pallets

Electric locking system for forklift accessories. Operated directly from the driver's seat.

Autonomously operated emptying device, to be picked up via the forks of the forklift truck.

Fork tip indicator with visual and acoustic display

Load basket or lifting device with ramp for wheelbarrows, wheelbarrows

Work basket with special drive-in shoes, swivel and fixed castors

Work basket with special substructure for trade fairs

Work basket with raised and protected rear side

Special work basket for forklift use

Work basket according to ÖNORM M 9616

Centrifugal spreader in fully galvanized special design with drive-in shoes

Conversion of a standard centrifugal broadcaster

Bolt-on forks with coated contact plates

Folding fork extension, 800mm / 1,300mm

Folding forks (800mm / 1,200mm) enable the forklift to be driven into a goods elevator

Folding forks 800mm / 1,200mm for the transportation (lengthwise and crosswise) of Euro pallets

Forks in special shape for Toyota high lift trucks

To avoid having to buy new forks, the upper mounting jaws were replaced.

Blade-shaft forks for the timber industry

Special forks for multiple sideshifters

Forks with offset special guide jaws

Special forks in milled design for holding special pallets

Bolt-on forks with polyurethane coating for transporting painted transformers

Adapter for forks

Quick-change system for forks

Hydraulically operated fork extension

Manually operated telescopic forks

Fork extension in closed design made of stainless steel with quick-release fastener, 2t / 2m

Fork extension with adapter for use with different forklift truck types, 3t

Automatically self-locking fork extension in partially enclosed design 3.5t / 2.28m

Hydraulic telescopic fork extensions 3.5t, 1,000 mm extension

Self-locking fork extension 4t / 2.4m

Fork extensions in closed design 5t / 2.3m

Push-on shoes with PU coating, 5t / 1.2m for metal pipes

Fork extensions including bolt-on forks, 5t / 2.4m

Self-locking fork extension in partially enclosed design, 5t / 2.4m

Fork extension in closed design 6t / 3m

Fork extension with load securing device, 6t / 2.5m

Fork extension in excess length, 8t / 4m

Slip-on shoes for drum transport, 10t / 1.5m

Prism slip-on shoes, 21t / 2.1m

Fork extension, 30t / 5m

SCHURZ support plate adapter for an existing SCHURZ 360° endless turning device.

SCHURZ support plate adapter with quick-release fastener

Quick-change support plate to increase the original width

Telescopic crane arm 2 to 3 meters telescopic, pick-up via fork entry shoes

Crane jib with manually and gradually adjustable hook position

Rigid crane jib with fold-up parking support

SCHURZ crane jib with individual front element

Rigid telescopic crane with support for higher loads on the hook.

This crane hook can be telescoped manually up to 6 meters.

SCHURZ battery changing hanger for mounting using the forks of an electric forklift truck.

Existing loads are various SCHURZ battery lifting beams with associated forklift batteries.

The SCHURZ lifting beam is picked up by the forks and automatically secured against slipping on both sides.

Lifting equipment to manipulate bogies for streetcars.

This lifting beam is used to transport 5 meter long wooden panels safely and without damage.

This SCHURZ long goods spreader beam is suitable for picking up and transporting panels with a maximum length of 15.5 m.

This SCHURZ long goods spreader beam has telescopic push forks with a special synchronized synchronous system.

Customized long goods traverse for panels

SCHURZ lifting beam with folding support legs

The traverse is a special design with two mechanically adjustable outer forks in the opening area.

SCHURZ long goods traverse for quick pick-up and locking by means of original fork adjustment

The SCHURZ long goods spreader beam is locked in place and secured against slipping by means of a SCHURZ special locking device.

The traverse is used to transport glued laminated timber with a length of 12 meters.

For loads with a length of up to 12 meters.

SCHURZ rigid long goods spreader beam for a sideloader

Special spreader beam for the safe handling of special pallets

SCHURZ 6/3/2 pallet fork with integrated sideshift

SCHURZ special fork positioner with hydraulic fork extension and swivel device for handling steel components.

The SCHURZ multiple sideshift was developed for transporting 2 special pallets side by side.

SCHURZ double pallet fork with removable fork back extensions for waste management

SCHURZ double pallet fork with integrated side shift for transporting two pallets with polystyrene blocks at the same time.

The SCHURZ double pallet fork is characterized by excellent visibility and low residual load capacity loss of the forklift.

SCHURZ special tine adjusters ensure optimized visibility conditions thanks to their special design.

SCHURZ fork positioner with rear-flanged side shift, load protection grid and guard plate for the hydraulic connections.

The SCHURZ combination implement was designed as a clear-view tine adjustment with light clamp function and integrated side shift.

SCHURZ integral clear view tine adjustment with double shaft guide

Special tine adjustment with clamping and spreading function

The electrical load safety device enables the safe transportation of forming tools.

The hydraulic load securing system prevents the load from tipping sideways.

SCHURZ hydraulic load holder for mounting between the forks.

This SCHURZ double pallet fork has a special load holder on the base frame for safe and easy handling of polystyrene blocks.

Mechanical underride bucket 1m³

SCHURZ underride bucket hydraulically tiltable forwards and backwards

Hydraulic underride bucket 2m²

Hydraulic underride bucket for transporting light loads. Quick and tool-free pick-up via fork entry shoes.

Hydraulic underride bucket 1.2m³ suitable for various forklifts.

The bucket can be tilted hydraulically forwards and backwards and is designed for a bulk material weight of 2,400 kg/m3.

Carrier plate bucket 0.8m³ in special design with above-average load capacity.

Hydraulically pivoting snow blade

The SCHURZ snow blade is available in various customized versions.

Snow blade 1.6m

Snow blade 1.6 m folding mechanism

Mechanical swivel snow blade, 2m

Snow blade 2.5 m hydraulic, foldable with wheels

Snow blade 3m hydraulic; version with wheels

Snow blade 3m, hydraulically swiveling

This tool manipulator enables forging dies with a maximum weight of 2,000 kg to be picked up safely and easily. The mandrels have been specially adapted to the molds.

The SCHURZ carrying mandrel is used to carry big bags with a weight of 2.5 tons.

This SCHURZ lifting pin was designed and manufactured for different forklifts with different fork dimensions.

This carrying mandrel is picked up by the forks and used for transporting plastic pipes.

Special mandrel for textile rolls with a small mounting diameter and above-average roll length.

Customized design of a paper roll mandrel

The SCHURZ carrier mandrel is used to transport paper rolls and is held by a carrier plate.

SCHURZ paper roll unwinding mandrel for holding various paper rolls with different core diameters.

The SCHURZ support mandrel is used for residual wire reels or spools with a total length of 2,500 mm and a maximum total weight of 400 kg.

The SCHURZ carrying mandrel type TD 20, suitable for a Linde E 25 forklift truck, is used to manipulate wire reels.

With a mechanical stop on the mandrel, it is possible to transfer wire reels to a stationary spooling device.

SCHURZ coil carrier with polyurethane spray coating for transporting sheet metal coils with a maximum total weight of 8 tons.

The special feature of this SCHURZ drum gripper is that it can be manually adjusted in depth. This ensures that the drum is optimally supported at the bottom and can therefore be transported safely.

Standard drum grippers or drum clamps are not suitable for US special drums.

The SCHURZ drum attachment arms are suitable for a Linde forklift truck type E 35L and are attached using the forks of the Stabau clamp fork and secured using the SCHURZ quick-release pins.

200 l metal drums with a maximum weight of 500 kg can be safely manipulated and emptied with the SCHURZ slip-on arms.

The SCHURZ transport hook is picked up via the forks of both Jungheinrich forklift trucks in operation. The hook height has been precisely and specifically adapted to the various forklift lifting heights, container types and existing door heights.

The SCHURZ container pushing and pulling device is equipped with fork entry shoes for mounting with the forklift forks. Due to the suspended design, the forks can be positioned above the container.

This SCHURZ container hook is suitable for a Linde H 80 forklift truck with a basic load capacity of 8,000 kg at LSP 900 mm.

Various empty containers can be driven under with the SCHURZ pulling device. By lifting, the containers are hooked in by means of retaining lugs and can then be pulled with the forklift.

This version of a container manipulator has a fold-out stand for safe storage.

The telescopic SCHURZ container manipulator is picked up by means of a forklift support plate and secured using screw jaws.

This container manipulator is used to manipulate large truck containers for repair and maintenance.

SCHURZ container manipulator suitable for an 8 t forklift truck.

The SCHURZ transport hook is used to manipulate roll-off containers.

The SCHURZ transport hook was designed and manufactured for special containers for the internal handling of raw materials and waste.

With this simple attachment, large containers can be maneuvered simply and easily with forklifts.

The concrete plank clamp is picked up and locked with the forks of the forklift truck.

This overlapping SCHURZ clamping fork was designed for pallets with different widths and different concrete casting molds.

Stapling fork for stapling cellulose bales

The special SCHURZ clear-view light clamp spreader is used to secure containers.

The SCHURZ clamping fork is used for handling conventional pallets and emptying waste containers.

The SCHURZ cardboard clamp ensures optimum hold and protects the transported goods.

The SCHURZ forging clamp is 360° endlessly rotatable with a braking device to prevent it from turning with the load.

With the SCHURZ wagon wheel tilting clamp, up to 4 wagon wheels can be picked up at the same time, turned through 90° and then stored horizontally for further processing.

The SCHURZ drum wire spool clamp is used to manipulate empty drums and wound wire spools.

The SCHURZ wire spool tilting clamp clamps and turns copper spools without damaging them.

The SCHURZ Auramo paper roll clamp is used for the safe and fast handling of paper rolls with a diameter of 270 mm to 1,600 mm.

The drum clamp is designed for two different drum versions with a capacity of up to 200 liters.

These bale clamps with integrated side shift ensure safe handling of bales of waste paper and wood filler with a maximum weight of 4,000 kg.

The SCHURZ Auramo bale clamp is used for handling waste paper bales.

The SCHURZ bale clamp including quick coupler for tool-free attachment was individually designed and manufactured for the customer's existing basic vehicle.

The SCHURZ recycling bale clamp is used for handling paper and plastic bales.

Attachable, hydraulic SCHURZ tilting device for mesh box pallets and pallets with pallet collars.

The 360° endlessly rotating turning device is used by a manufacturer of bakery machines.

The clamping fork is versatile. It is not only used for transporting pallets, but also for emptying various loads.

This clamp fork is a multifunctional attachment and can be rotated 360 degrees endlessly.

Tiltable spreader clamp with integrated side shift for a 4.5 t forklift truck.

The hydraulic tipping device was developed for 240 l dustbins. The container can be tilted forward 180° in a controlled manner.

The SCHURZ container emptying device can not only be used for emptying 240 liter plastic waste bins, but the emptying device can also be quickly converted into a SCHURZ drum emptying device thanks to the interchangeable additional gripping trays.

The large waste bin emptying device for 2 and 3 t forklifts is used to empty 1100 l PVC waste bins with sliding lids and 240 l household waste bins.

The slip-on shoes have been designed for picking up and emptying 240 l PVC manure skips with hinged lids. Two manure bins can be picked up and emptied one behind the other in the direction of travel per emptying process.

The emptying device is held and locked between the forks by means of a support plate.

Metal boxes with scrap metal must be emptied. The boxes have a maximum weight of 1,000 kg. Not only did the different dimensions of the boxes have to be taken into account, but the device was also designed to fit several forklifts in use.

The emptying device for metal containers with dimensions of 1,100 mm x 900 mm x 1,050 mm (W x D x H) and a maximum weight of up to 2,000 kg.

The SCHURZ container tipping device was designed to be mounted with the SCHURZ clamp fork already available in the company and is suitable for a Weidemann telescopic handler type 4070.

This emptying device is used to manipulate seed hoppers and Euronorm pallets and has 4 hydraulic functions.

The SCHURZ 360° endless turning device with rear-flanged sideshift is used to empty pallet cages and containers of different sizes on both sides, up to a maximum weight of 500 kg.

The SCHURZ container with integrated hydraulic emptying device is used for the transportation of sewage sludge and the controlled and gentle emptying into a hopper at a height of 5,000 mm.

Hydraulic SCHURZ tipping device for a 3.5 t forklift truck.

Tipping device for easy and safe emptying of containers with a width of 1,030 mm and a length of 1,200 mm.

Hydraulic tipping device for emptying 1,500 kg containers for a Linde E30 forklift truck.

Universal device for emptying 3 different special containers plus pallet cages for a Linde R20 reach truck.

No standard appliance can be used to empty these special plastic boxes. Although the boxes can be picked up using the forks, they cannot be turned and emptied as they are multi-part boxes.

Tipping container in a special stainless steel design for the food sector

The flap of the concrete transport container can be opened mechanically for emptying using a lever.

This tank with integrated hydraulic emptying device is used to transport sewage sludge.

This roll-off container can be emptied independently and can also be tipped back into its original position without much effort. These roll-off containers are also fitted with smooth-running fixed and swivel castors for forklift-free, in-house handling.

The hopper can be picked up by the forklift forks to enable transportation by forklift.

The hydraulic feed container is filled with fish feed and positioned above a pond.

Mechanical tipping container with adjustable tipping brake for wood waste

Heavy-duty tipping container with 0.5m³ volume for emptying cast iron and metal scrap.

These containers are available in a wide variety of designs and can be fitted with wheels on request.